Automatic Transmission Fluid (ATF) Additive (250ml)

Optimally cares for rubber and plastic seals in steering gears and automatic transmissions. Leaks on transmissions and gears, caused by hardened and brittle seals, are prevented and eliminated. Cleans holes and channels in the transmission and refreshes the oil’s performance. Reduces noise formation and improves the shifting in automatic transmissions. Extends the life of steering gears and automatic transmissions.
PKR 1,800

Intended use
Add ATF Additive to the power steering reservoir or add to the transmission oil through the dipstick. The contents of 250 ml are sufficient for up to 8 l oil volume. Suitable for steering gears and automatic transmissions that are filled with ATF II and ATF III oils.

Description
Due to the additives contained, rubber and plastic seals in power-steering and transmissions receive optimal care. Leaks in the gearbox caused by hardened or brittle seals are prevented or remedied. In addition, holes and ducts in the transmission are cleaned, the performance of the oil is revitalized. The noise from the power-steering will be reduced and the shifting operations are improved. Using ATF Additives, the service life of automatic transmissions can be lengthened and repair costs reduced.

Properties

  • Regenerates seals
  • Prevents oil loss
  • Care and protection
  • Cleans and maintains
  • Stable to oxidation
  • Minimizes unwanted noise
  • Prevents expensive repairs
  • Increases service life
  • High wear resistance
  • Prevents rapid aging of oil
  • Damps shifting operations

Technical data

  • Color / appearance: braun / brown
  • Viscosity at 40 °C: ~ 166 mm²/s DIN 51562
  • Viscosity at 100 °C: ~ 26 mm²/s DIN 51562
  • Density: 0,888 g/ml
  • Refractive index at: 20 °C ~ 1,478
  • Form: flüssig / liquid
  • Odor: charakteristisch / characteristic

Areas of application
Suitable for power-steering and automatic transmissions that are filled with ATF II and ATF III oils.

Application
Mix ATF Additive into the gear oil using the dipstick. 250 ml are sufficient for up to 8 liters of oil.

 

All pictures shown here are for illustration purpose only. Actual product may vary due to product enhancements.

Customers who bought this item also bought

Injection Cleaner (300ml)

Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming. Eliminates start problems and rough engine running. Cares for all components in the gasoline injection system. Protects the entire fuel system from corrosion. Improves the throttle response and compression. Optimizes the emission test values and performance of the engine. Clean engines need less fuel and reduce emissions.
PKR 800

Motor Oil Saver (300ml)

Regenerates rubber and plastic engine seals such as shaft seals and valve stem seals and prevents oil stains under the vehicle. Counteracts oil dilution. Reduces engine noise and oil consumption through piston rings and valve guides.
PKR 700

Fuel System Treatment (300ml)

Maintains and protects the entire fuel system from wear, deposits and corrosion. Improves engine running and prevents performance decrease. Clean engines need less fuel and reduce emissions.
PKR 1,000

Oil Additive (300ml)

The MoS2 low-viscosity engine oil creates a heavy-duty lubricant film on all frictioning and sliding metal surfaces. It reduces friction, guaranteeing the aggregates run more smoothly. That produces these benefits: Significant fuel and oil saving, scientifically proven wear reduction, high reliability, antifriction properties.
PKR 750