Cera Tec (300ml)

Cera Tec is a high-tech ceramic wear protection and can be mixed with all commercially available oils. Cera Tec reduces friction and wear by using chemically and thermally extremely high-resilient ceramic compounds. Prevents direct metal/metal contact, increasing the service life of the aggregate. The smooth-running effect reduces fuel consumption in gasoline and diesel engines.
PKR 2,500

Intended use
Wear protection for engines, transmissions, pumps and compressors. Cera Tec is added to the oil and is self-mixing. Sufficient for 5 l oil volume. With long-term effect for 50,000 km. Not suitable for use with wet clutches!

Description
Micro ceramic solid lubricant suspension based on hexagonal boron nitride (BN) in mineral oil. The laminar graphite-similar structure reduces friction and wear and prevents direct metal-to-metal contact. The < 0.5 µm particle size guarantees optimal filter flow properties and protects against depositing of solid lubricant articles.

Properties

  • Reduces frictional losses
  • Suitable for diesel particulate filters
  • Mixable with all commercially available motor oils
  • Increases smooth operation
  • Highest thermal stability
  • Excellent high and low temperature behavior
  • Tested for catalytic converters
  • Stable under extreme pressures
  • Compatible with fine filters
  • No deposits
  • Long engine service life
  • Chemically inert
  • Reduces fuel consumption

Technical data

  • Base: BN Mikrokeramik / BN micro ceramic
  • Color / appearance: orange
  • Particle size: Mehrheit < 0,5 / Majority <0.5 µm
  • Temperature stability of the ceramic particles: bis + 1200 / up to 1200 °C
  • Density at 20 °C: 0,893 g/cm³ DIN 51757
  • Viscosity at 20 °C: ~250 mPas DIN 51398
  • Flash point: >100 °C DIN ISO 2592
  • Pour point: -20 °C DIN ISO 3016
  • Form: flüssig / liquid
  • Odor: charakteristisch / characteristic

Areas of application
Added to the lubricating oil of engines, compressors, pumps and transmissions. Excellent for use in passenger
car and commercial vehicle engines (gasoline and diesel). Mixable with all commercially available motor oils.

Application
300 ml is sufficient for up to 5 liters of motor oil.Long-term effect up to 50,000 km. Shake container before use.

Comment
Not suitable for use with wet clutches.


All pictures shown here are for illustration purpose only. Actual product may vary due to product enhancements.

Customers who bought this item also bought

Engine Flush Plus (300ml)

Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended.
PKR 600

Injection Cleaner (300ml)

Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming. Eliminates start problems and rough engine running. Cares for all components in the gasoline injection system. Protects the entire fuel system from corrosion. Improves the throttle response and compression. Optimizes the emission test values and performance of the engine. Clean engines need less fuel and reduce emissions.
PKR 800

Radiator Stop Leak (150ml)

Small leaks caused by stone impacts, porous soldering points and hairline cracks in the cooling simple are easy to localize (one notices that the cooling water level is sinking). LIQUI MOLY Radiator Stop-Leak completely seals such leaks immediately with ease. Secures the combustion chamber from damages caused by coolant admission.
PKR 550

Cockpit Glanz (200ml)

Renews dull and weathered plastic. The plastic parts regain their original appearance and do not dry out. Prevents bothersome creaking and squeaking noises. Cares without greasing, is antistatic and dust-repellent. Good lubrication action on rubber and plastic parts, impregnates and insulates, general use. Contains silicon.
PKR 350