For all diesel engines both with and without diesel particulate filters. Preventative during every inspection, after repairs on the fuel system or to solve problems (see application description on the pack or in the technical datasheet). Turbocharger tested. Perfectly compatible with all conventional diesel and biodiesel fuels. Can contents are sufficient for up to 75 l fuel.
Diesel Purge contains a mixture of agents with powerful cleaning properties. The special additives guarantee corrosion protection and increase ignition performance (cetane number).
- Boosts the cetane number
- Increases operational reliability
- Eliminates diesel knocking
- Reduces deposits
- Cleans the fuel system
- Good corrosion protection
- Guarantees optimum combustion
- Highly economical
- Color / appearance: hellbraun / light brown
- Flash point: 63 °C
- Odor: charakteristisch / characteristic
- Form: flüssig / liquid
- Viscosity at 40 °C: <7 mm²/s
- Density at 15 °C: 0,823 g/cm³
Areas of application
Used for all diesel engines to prevent and eliminate problems associated with uneven idling and partialload knocking. Quantity to be used for preventive and remedial use: 500 ml.
Preventive use: Add to diesel fuel according to the inspection intervals.
Remedial use: Unclip the fuel pipe and immerse the end in the Diesel Flush. Close the fuel return pipe or feed that into the Diesel Flush. Start the engine and allow the engine to run at different speeds with the Diesel Flush unmixed. After the cleaning process, assemble the vehicle's system. In extreme cases, repeat the cleaning procedure if necessary. As an alternative to remedial procedure, our Jet-Clean Unit can also be
used for cleaning. To do this, pour 2-3 litres Diesel Flush into the Jet-Clean tank. Further instructions on
use are given in the instructions for the Jet-Clean unit.
All pictures shown here are for illustration purpose only. Actual product may vary due to product enhancements.