Engine Flush Plus (300ml)

Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended.
PKR 600

Intended use

For cleaning and flushing out the oil circuits of gasoline and diesel engines. 300 ml sufficient for up to 6 l of motor oil. Not suitable for use on motorbikes with wet clutches.

Description

Engine Flush Plus is a specially formulated combination of additives and carrier fluid. In combination with the carrier fluid, the highly effective detergent and dispersant additives dissolve sludge and lacquer formers. All types of oil-soluble and oilinsoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics.

Properties

  • Optimal engine performance
  • Highly economical
  • Tested for turbochargers and catalytic converters
  • Does not attack common sealing materials
  • Gentle cleaning
  • Rapid cleaning
  • Suitable for diesel particulate filters
  • Simple to use without disassembly
  • Minimizes wear

Technical data

  • Color / appearance: gelb, braun / yellow, brown
  • Base: Additiv, Trägerflüssigkeit / additive, carrier liquid
  • Density at 20 °C: 0,81 g/cm³ DIN 51 757
  • Flash point: 63 °C DIN ISO 2592
  • Pour point: -45 °C DIN ISO 3016
  • Form: flüssig / liquid
  • Viscosity at 40 °C: <7 mm²/s
  • Odor: charakteristisch / characteristic

Areas of application

Cleaning and flushing out the oil circuits of gasoline and diesel engines. The use of Engine Flush Plus is dependent on the degree of contamination of the oil
circuit.

Not suitable for use on motorbikes with wet clutches.

Application

One 300 ml can is sufficient for up to 6 liters of oil. Add Engine Flush Plus to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush Plus is compatible with all commercially
available motor oils.

 

 

All pictures shown here are for illustration purpose only. Actual product may vary due to product enhancements.

Customers who bought this item also bought

Injection Cleaner (300ml)

Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming. Eliminates start problems and rough engine running. Cares for all components in the gasoline injection system. Protects the entire fuel system from corrosion. Improves the throttle response and compression. Optimizes the emission test values and performance of the engine. Clean engines need less fuel and reduce emissions.
PKR 800

Oil Smoke Stop (300ml)

Oil Smoke Stop reduces the oil consumption of gasoline and diesel engines via the piston rings and valve guides. It prevents blue smoke and oil mist and acts against the loss in viscosity in motor oils. Oil Smoke Stop increases the compression ratio and reduces engine noise. Provides extra protection in engines with high levels of wear. Extends the service life of catalytic converters.
PKR 700

Brake & Parts Cleaner (500ml)

Makes your assembly work easier, cleaner and safer. It completely eliminates oil, grease and dirt. The treated parts are absolutely deposit-free and completely degreased. Good penetrating ability, controlled and clean evaporation.
PKR 450

Molygen 5W-50 (1 Litre)

FULLY SYNTHETIC - PETROL - DIESEL
Specially developed high-performance, low-friction engine oil for year-round use. The combination of synthetic base oils and advanced additive technology as well as the special Molygen additive ensures that the engine oil is of low viscosity and has a high shear stability and reliably prevents the formation of deposits, significantly reducing frictional losses in the engine and providing the optimum protection from wear.
PKR 1,650