Injection Cleaner (300ml)

Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming. Eliminates start problems and rough engine running. Cares for all components in the gasoline injection system. Protects the entire fuel system from corrosion. Improves the throttle response and compression. Optimizes the emission test values and performance of the engine. Clean engines need less fuel and reduce emissions.
PKR 800

Intended use

Suitable for all gasoline engines – as a preventative measure or to solve problems. Tested safe with catalytic converters and turbochargers. For adding directly to the fuel tank. 300 ml are sufficient for up to 70 litre fuel. Effect lasts up to 2,000 km.

Description

Injection Cleaner is a highly effective combination of active agents for cleaning and protection. This product is formulated in accordance with the latest standard of fuel and additive technology and meets the requirements of today's engines, fuels and running conditions. Suitable for all gasoline fuel injection systems such as K, KE and L-Jetronic systems, etc.

Properties

  • Cleans the injection system
  • Reduces pollutant emissions
  • Removes carbon deposits from the intake valves and in the combustion chamber
  • Optimum dosage
  • Cost-effective due to exact dosage
  • Guarantees low fuel consumption
  • Tested for turbochargers and catalytic converters

Technical data

  • Odor: charakteristisch / characteristic
  • Color / appearance: gelb / yellow
  • Form: flüssig / liquid
  • Flash point: 63 °C
  • Density at 15 °C: 0,806 g/cm³
  • Viscosity at 40 °C: < 0,07 mm²/s

Areas of application

For rectifying problems such as difficulties with starting, irregular idling, poor throttle response, performance losses, surges due to lean mixture and poor exhaust values caused by contaminated injection systems. Repeat treatment if problems reoccur. Suitable for all gasoline injection systems.

Application

One 300 ml can is sufficient for up to 70 liters of fuel. This product is effective over 2,000 km. Injection Cleaner can be mixed with fuel at any time since mixing is spontaneous. One 300 ml can is sufficient for up to 70 liters of fuel. This product is effective over 2,000 km. Injection Cleaner can be mixed with fuel at any time since mixing is spontaneous.


All pictures shown here are for illustration purpose only. Actual product may vary due to product enhancements.

Customers who bought this item also bought

Engine Flush Plus (300ml)

Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended.
PKR 600

Octane Plus (150ml)

Octane Plus is a self-mixing combination of agents formulated according to state-of-the-art additive and fuel technology. Octane Plus is for universal use and increases the research octane number (RON) of the fuel by 2-4 points, depending on the RON. Thanks to the increased performance of the fuel, engine damage caused by knocking combustion is prevented. The increase of the octane number ensures low fuel consumption.
PKR 800

Speed Tec Gasoline (250ml)

This highly modern fuel additive was specially developed to noticeably improve acceleration and throttle response under partial load. Provides more driving pleasure through optimized performance yield. The engine starts better and even runs more smoothly.
PKR 950

Pro-Line Throttle Valve Cleaner (400ml)

Special active solvent for cleaning typical dirt and deposits in the intake and throttle valve area. Loosens and removes all dirty deposits and dirt such as oil, resin, glue, etc. It guarantees the functional performance of the moving parts and reduces fuel consumption. Increases the reliability of gasoline-powered engines.
PKR 1,200