Oil Smoke Stop (300ml)

Oil Smoke Stop reduces the oil consumption of gasoline and diesel engines via the piston rings and valve guides. It prevents blue smoke and oil mist and acts against the loss in viscosity in motor oils. Oil Smoke Stop increases the compression ratio and reduces engine noise. Provides extra protection in engines with high levels of wear. Extends the service life of catalytic converters.
PKR 700

Intended use

For all gasoline and diesel engines. Compatible with all commercially available motor oils. Not suitable for use in motorcycles with wet clutches.

Description

Oil Smoke Stop reduces the oil consumption of gasoline and diesel engines via the piston rings and valve guides. It prevents blue smoke and oil mist and acts against the loss in viscosity in motor oils. Oil Smoke Stop increases the compression ratio and reduces engine noise. Provides extra protection in engines with high levels of wear. Extends the service life of catalytic converters.

Properties

  • Reduces oil consumption
  • High shear stability
  • Stabilizes loss of viscosity
  • Prevents blue, smoky exhaust fumes

Technical data

  • Color / appearance: gelb / yellow
  • Appearance / properties: viskose Flüssigkeit / viscous liquid
  • Density at 15 °C: ca. 0,868 g/cm³
  • Viscosity at 100 °C: ~140 mm²/s
  • Flash point: 120 °C
  • Odor: charakteristisch / Characteristic
  • Form: flüssig / liquid

Areas of application

For all gasoline and diesel engines. Compatible with all commercially available motor oils. Not suitable for use in motorbikes with wet clutches.

Application

One 300 ml can of Oil Smoke Stop is sufficient for 4 - 6 liters of motor oil. Do not add more than 10 %. Add to the warm motor oil during every oil change and between oil changes if oil consumption is very high.

 

All pictures shown here are for illustration purpose only. Actual product may vary due to product enhancements.

Customers who bought this item also bought

Engine Flush Plus (300ml)

Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended.
PKR 600

Diesel Purge (500ml)

Removes deposits on injection nozzles and in the combustion chamber. Increases the cetane rating. Eliminates engine operation problems such as knocking in idle and provides round and quiet engine running. Protects the entire fuel system from corrosion. Optimizes the emission test values. Can also be used as a preventative measure. Clean engines need less fuel and reduce emissions.
PKR 850

Super Diesel Additive (250ml)

Removes deposits in the diesel injection system and in the combustion chamber and prevents them from renewed formation. Maintains all components in the diesel injection system. Prevents jet needles from fusing and gumming. Increases the cetane rating and improves the ignition performance of diesel fuel. Ensures quiet engine running. Protects the entire fuel system from corrosion and wear. Optimizes the emission test values and performance of the engine. Clean engines need less fuel and reduce emissions.
PKR 700

Injection Cleaner (300ml)

Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming. Eliminates start problems and rough engine running. Cares for all components in the gasoline injection system. Protects the entire fuel system from corrosion. Improves the throttle response and compression. Optimizes the emission test values and performance of the engine. Clean engines need less fuel and reduce emissions.
PKR 800