Pro-Line Throttle Valve Cleaner (400ml)

Special active solvent for cleaning typical dirt and deposits in the intake and throttle valve area. Loosens and removes all dirty deposits and dirt such as oil, resin, glue, etc. It guarantees the functional performance of the moving parts and reduces fuel consumption. Increases the reliability of gasoline-powered engines.
PKR 1,200

Intended use

For the intake and throttle valve area including nozzles and holes. Suitable only for use in internal combustion engines!

Description

Special active solvent for cleaning typical contamination and deposits found in the intake and throttle valve areas. Dissolves and removes all smeary deposits and contaminants such as oil, resins, adhesive residues, etc. Also reliably cleans nozzles and internal components. Ensures the operability of all moving parts and reduces fuel consumption.

Properties

  • Excellent cleaning effect
  • Simple to use
  • Cleaning possible without dismantling
  • Optimizes economical use
  • Rapid cleaning
  • Tested for catalytic converters

Technical data

  • Density: 0,87 g/cm³
  • Color / appearance: gelb / yellow
  • Form: lüssig, aerosol / liquid, aerosol
  • Base: Lösungsmittelgemisch / Mixture of solvents
  • Odor: aromatisch / aromatic
  • Flash point: -19 °C

Areas of application

Removes contamination and deposits in the intakeand throttle valve area. Only suitable for use in gasoline engines.

Application

Turn the engine off, thoroughly spray the parts to be cleaned and allow the agent to take effect for 2 to 3 minutes. Then restart the engine and generously spray the complete area again with the engine running at medium speed. Repeat cleaning in extreme cases.

Note: The spray extension can be detached from the spray nozzle, depending on the application area.
Do not use on hot surfaces or polycarbonate. The product may lead to color changes on paints. We therefore recommend covering the areas at risk prior to application. Always test on hidden areas first if using on sensitive materials.

 

All pictures shown here are for illustration purpose only. Actual product may vary due to product enhancements.

Customers who bought this item also bought

Injection Cleaner (300ml)

Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming. Eliminates start problems and rough engine running. Cares for all components in the gasoline injection system. Protects the entire fuel system from corrosion. Improves the throttle response and compression. Optimizes the emission test values and performance of the engine. Clean engines need less fuel and reduce emissions.
PKR 800

Oil Smoke Stop (300ml)

Oil Smoke Stop reduces the oil consumption of gasoline and diesel engines via the piston rings and valve guides. It prevents blue smoke and oil mist and acts against the loss in viscosity in motor oils. Oil Smoke Stop increases the compression ratio and reduces engine noise. Provides extra protection in engines with high levels of wear. Extends the service life of catalytic converters.
PKR 700

Cockpit Glanz (200ml)

Renews dull and weathered plastic. The plastic parts regain their original appearance and do not dry out. Prevents bothersome creaking and squeaking noises. Cares without greasing, is antistatic and dust-repellent. Good lubrication action on rubber and plastic parts, impregnates and insulates, general use. Contains silicon.
PKR 350

Engine Flush Plus (300ml)

Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended.
PKR 600